HomeGlossaryMean Time to Resolve (MTTR)
Glossary

What Is Mean Time to Resolve (MTTR)?

Mean time to resolve (MTTR) is the average time from an IT problem being reported to its full fix. The same letters can also mean repair, recover or respond.

Definition

What does MTTR mean?

MTTR stands for mean time to resolve: the average time an IT team takes to fix a problem, from the report until it is fully resolved. The same letters also stand for mean time to repair, recover and respond, so check which one a report means before comparing numbers.

Full guide: Response time vs resolution time: what to ask for Service: IT Support

Mean time to resolve (MTTR) is a service metric: add up the resolution time of every ticket closed in a period and divide by the number of tickets. It tells a business how long, on average, its people wait for a fix. It is an average across many tickets, not a promise about any one of them.

The abbreviation has four common readings. Mean time to repair comes from hardware maintenance and covers the repair work itself. Mean time to recover, or recovery, covers the time to restore a failed system: NIST's glossary defines mean time to recovery as a metric that tracks the average amount of time it takes to recover from a product or system failure, and Microsoft's reliability guidance describes it as the time taken to restore a component after a failure is detected. Mean time to respond measures how fast work begins. Mean time to resolve is the widest, because it includes the fix that stops the problem returning. A report that says MTTR without saying which one cannot be compared with anyone else's.

An average also hides the cases that matter. Fifty password resets closed in five minutes each will bury one outage that lasted two days. Read MTTR by priority level, ask for the median or the longest ticket alongside the mean, and check what was left out, such as time waiting on the user or a vendor. Companion measures fill in the picture: mean time between failures shows how often things break, and the first-call resolution rate shows how many problems never needed a second contact.

Reviewed by Joel Baum, Founder. Our editorial standards.

Why it matters for a small business

MTTR is the closest thing to a single number for how long your staff sit idle when technology fails, which is why providers like to quote it. It is useful as a trend and risky as a headline. A falling average by priority level, alongside a falling ticket count, means problems are being fixed faster and prevented. A good-looking average with no breakdown may only mean the desk closes many easy tickets. Ask what the letters stand for, what the clock includes and what the number is for critical incidents alone.

The numbers in a NetSys monthly report

NetSys reports resolution alongside response instead of leading with a single average. The monthly help desk report shows ticket volume, response and resolution times and the recurring causes being fixed, so leadership can see what broke, how fast it was fixed and what we changed so it stops breaking.

For recovery from a system failure, we would sooner quote a tested figure than an average. In a published project for a large international food importer, the failover of the ERP and SQL core was measured at 15 minutes in a test. That is evidence for that system, not a promise for every outage.

Sources

Checked on November 22, 2026.

Common Questions

Mean Time to Resolve (MTTR): FAQs

What does MTTR stand for?

Most often mean time to resolve, mean time to repair, mean time to recover or mean time to respond. All four are averages measured from a failure or a report, but they stop the clock at different points. In help desk reporting it usually means resolve; in reliability engineering it usually means repair or recover.

How do you calculate mean time to resolve?

Add the time from report to resolution for every ticket resolved in the period, then divide by the number of tickets. State what the clock leaves out, such as time waiting for the user or a third party, and calculate it separately for each priority level so routine requests do not hide slow incidents.

What is the difference between MTTR and RTO?

MTTR is a measurement of what happened: the average time fixes or recoveries took. A recovery time objective (RTO) is a target set in advance: the longest a system may stay down before the business is harmed. Comparing the two shows whether the recovery plan is realistic.

What is the difference between MTTR and MTBF?

MTTR measures how long a fix takes. Mean time between failures (MTBF) measures how long a system runs before it fails again. Together they describe reliability: a system that rarely fails and is restored quickly is available most of the time.

IT Support

Discuss it support for your business.

Tell us about your current systems, the result you need and your timeline. We will discuss the work, responsibilities and pricing before you decide on an engagement.